Ppp0 как-есть, но не работает

Автор: a-a-iv Дата: 28.05.2004 13:19 Устанавливается соединение с использованеим pppd (GPRS MTS), но оно не работает (ping не проходят). Все как-бы открыто брандмауэр выключен.
Подскажите где может быть проблема?
[root@APM_2 sbin]# ./pppd call motorola-e365

OK

OK

OK

250019111031753

OK

OK

OK

OK

OK

CONNECT
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0x0>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>]
rcvd [LCP ConfReq id=0x9e <auth pap> <pcomp> <accomp>]
sent [LCP ConfRej id=0x9e <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x9f <auth pap>]
sent [LCP ConfAck id=0x9f <auth pap>]
sent [PAP AuthReq id=0x1 user="mts" password=<hidden>]
sent [PAP AuthReq id=0x2 user="mts" password=<hidden>]
rcvd [PAP AuthAck id=0x2 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
rcvd [IPCP ConfReq id=0x53 <addr 10.17.160.1>]
sent [IPCP ConfAck id=0x53 <addr 10.17.160.1>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 10.17.160.93>]
sent [IPCP ConfReq id=0x2 <addr 10.17.160.93>]
rcvd [IPCP ConfAck id=0x2 <addr 10.17.160.93>]
local IP address 10.17.160.93
remote IP address 10.17.160.1
Script /etc/ppp/ip-up started (pid 6664)
Script /etc/ppp/ip-up finished (pid 6664), status = 0x0
Terminating on signal 2.
Script /etc/ppp/ip-down started (pid 6770)
sent [LCP TermReq id=0x2 "User request"]
Script /etc/ppp/ip-down finished (pid 6770), status = 0x0
rcvd [LCP TermAck id=0x2 "User request"]
Connection terminated.
Connect time 4.7 minutes.
Sent 4128 bytes, received 30 bytes.




Serial link disconnected.
Connect time 4.7 minutes.
Sent 4128 bytes, received 30 bytes.
[root@APM_2 sbin]# mc
[root@APM_2 sbin]# ping 213.033.251.001
connect: Network is unreachable
[root@APM_2 sbin]# ./pppd call motorola-e365

OK

OK

OK

250019111031753

OK

OK

OK

OK

OK

CONNECT
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0x0>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>]
rcvd [LCP ConfReq id=0xa1 <auth pap> <pcomp> <accomp>]
sent [LCP ConfRej id=0xa1 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xa2 <auth pap>]
sent [LCP ConfAck id=0xa2 <auth pap>]
sent [PAP AuthReq id=0x1 user="mts" password=<hidden>]
sent [PAP AuthReq id=0x2 user="mts" password=<hidden>]
rcvd [PAP AuthAck id=0x2 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x55 <addr 10.17.160.1>]
sent [IPCP ConfAck id=0x55 <addr 10.17.160.1>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfRej id=0x1 <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 10.17.160.227> <ms-dns1 192.168.192.1>]
sent [IPCP ConfReq id=0x3 <addr 10.17.160.227> <ms-dns1 192.168.192.1>]
rcvd [IPCP ConfAck id=0x3 <addr 10.17.160.227> <ms-dns1 192.168.192.1>]
local IP address 10.17.160.227
remote IP address 10.17.160.1
primary DNS address 192.168.192.1
Script /etc/ppp/ip-up started (pid 6844)
Script /etc/ppp/ip-up finished (pid 6844), status = 0x0

Завершение ctrl+c

Terminating on signal 2.
Script /etc/ppp/ip-down started (pid 6982)
sent [LCP TermReq id=0x2 "User request"]
Script /etc/ppp/ip-down finished (pid 6982), status = 0x0
rcvd [LCP TermAck id=0x2 "User request"]
Connection terminated.
Connect time 3.8 minutes.
Sent 166 bytes, received 148 bytes.

Смущает строка /etc/ppp/ip-up finished (pid 6844), status = 0x0
Подскажите где может быть проблема?
Re: ppp0 как-есть, но не работает 31.05.2004 09:44Gladi Выполни route -n и дай почитать таблицы маршрутов
Re: ppp0 как-есть, но не работает 31.05.2004 23:42a-a-iv Команда route -n лает следующую таблицу маршрутизации ядра

[root@localhost sbin]# ./route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.17.160.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 lo
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.17.160.1 0.0.0.0 UG 0 0 0 ppp0

[root@localhost sbin]# ping 10.17.160.1
PING 10.17.160.1 (10.17.160.1) 56(84) bytes of data.

--- 10.17.160.1 ping statistics ---
20 packets transmitted, 0 received, 100% packet loss, time 19012ms
Re: ppp0 как-есть, но не работает 31.05.2004 23:50a-a-iv Вопрос, есть ли счастливцы у кого работало соединение GPRS именно МТС в Питере. Есть сильное подозрение, что наверное дело еще и в МТС.
RSS-материал